Product Name : Proximity Card Access Controller/Reader
Product No : PP-5878G

Product Description  

•Access control system with integral Proximity/RF/reader into one unit.

•Can be On/Off line use and external another reader for IN/OUT application.

•Up to 9,999 cards capacity for Access control function.

•Model: PP-5878G is Standalone type proximity card access controller.

•Model: PP-5707G is On-line type proximity card access controller.

PP-5707G series: The minimum order quantity: 200 pcs



•Easy to install, low and designed for indoor or outdoor use.

•With tamper switch and two loop sensor inputs to trigger alarm as case is tampered or loop is intruded.

•Programmable door release & monitoring time, error trials, alarm time.

•Non-volatile EEPROM to store system parameters for 10 years.

•The Pegasus proximity readers are reading EM chip proximity card and proximity keyfob ... etc.

•LED indicator to show the operation status.

•With CPU watch-dog function to prevent malfunction.



Dimensions 122(L) x 85(W) x 32(H)mm
Weight 310g ± 5%
Operation temperature -15°C ~ 55°C
Humidity 20%~90% RH, Non condensation
Power supply 12 V DC
Reading range 5 to 15 cm
Frequency of operation ASK 125KHz
Card holders 9,999cards
Type Surface mount, water proof 

With brief 3 x 4 membrane keypad for system programming and password entry

Monitor inputs Door contact, Exit push button,tamper switch
Transmission rate 4,800 bps, N.8.1 (optional for 300~19200bps)
Card standard

125KHz ASK EM / 125KHz FSK / 13.56MHz Mifare (ISO 14443A , ISO 14443B, ISO 15693) / 13.56MHz Felica (ISO 18092 UID) / Q type

※ Support customized card.

Interface RS-485 or Wiegand output or TTL(optional)  


Mifare is a registered trademark of NXP B.V.

FeliCa is a trademark of Sony Corporation.


We reserve the right to change the specification without prior notice or obligation!