• With tamper switch and two loop sensor inputs to trigger alarm when case is tampered or loop is intruded.
• DC 12V operated therefore battery operated be possible when AC power is interrupted.
• Allows basically 3,000 magnetic stripe cards or 5 groups of programmable door codes variable from 1 to 8 digits for access control and optionally for 7,000 and 9,999 cards (on special model) can be singly or blockly added / through keypad.
• Programmable door release time, error trials, alarm time and door monitoring time.
• Data retention for without battery backup.
• With programmable mode for ARM / DISARM output.
• With CMOS CPU of low power consumption.
• Selectable encyphered card format which can not be easily duplicated by ISO Encoder.
• Intelligent functions programmable through keypad and with LED's indication.
• Metal case and keypad as well as case lock to prevent vandalism.

Specifications:

	PG-707V/U/T	PG-727V/U/T
Model by card holder	PG-707V : for 3000 cards PG-707U : for 7000 cards PG-707T : for 9999 cards	PG-727V : for 3000 cards PG-727U : for 7000 cards PG-727T : for 9999 cards
Card reading	Magnetic stripe card, ISO track II
Type	Swipe and surface mount
Operation mode	Card, card and / or keypad, keypad only, card and PIN in card, free access
Pass code	5 groups of programmable door codes variable from 1 to 8 digits
Monitor inputs	Door contact, Exit push button, case tamper and safety zone sensor input
Operation temperature	0C ~ 50C
Humidity	20%~90% RH, Non condensation
Power supply	12V DC
Dimensions	120(L)x 100(W)x 32(H)mm	156(L)x 123(W)x 42(H)mm
Weight	0.8kg5%	1kg5%

• With tamper switch and two loop sensor inputs to trigger alarm when case is tampered or loop is intruded.
• DC 12V operated therefore battery operated be possible when AC power is interrupted.
• Allows basically 3,000 magnetic stripe cards or 5 groups of programmable door cades variable from 1 to 8 digits for access control and optionally for 7,000 and 9,999 cards (on special model) can be singly or blocky added/ deleted through keypad.
• Programmable door release time, error trials, alarm time and door monitoring time.
• Data retention without battery backup.
• With programmable mode for ARM/DISARM output.
• With CMOS CPU of low power consumption.
• Selectable encyphered card format while can not be easily duplicated by ISO Encoder.
• Intelligent function programmable through keypad and with LED's indication.
• All programming can be done by using the inherent reader and keypad as well as by PC or other Host computer in On-lined mode.
• For more advanced control, you may setting all or partial readers to the Host computer for more delicate control.
• Metal case and keypad as well as case lock to prevent vandalism.
• With CPU watch-dog function to prevent malfunction.